Choose your learning path

Walls, wraps & projects

Measure the actual object or wall, choose the right construction and use the current product template. A large sticker is not automatically a conformable wrap or a damage-free wall product.

Start with your situation

Your project or questionWhat to check
A wall kitConfirm finished piece dimensions and the actual piece count. Plan spacing separately from the packing sheet.
A window graphicSpecify adhesive side and viewing direction. Mirroring the artwork alone does not change the adhesive or print construction.
A measured panel or wrapMeasure around hardware and interruptions. A rectangular panel is not an exact-fit kit with automatically removed openings.
Concept diagram for walls, wraps & projects
Conceptual teaching diagram. Use the exact product’s current configuration and instructions; this is not a measured physical specification.

Learn in this order

  1. When should I choose removable wall vinyl or fabric?
  2. How do I measure a wall decal kit layout?
  3. How do I plan and install a wall decal kit?
  4. How do I install and store vinyl fabric?

Worked example: A kit photo shows a whole room

Count the current supplied pieces, then make a paper layout using their finished measurements. Leave deliberate gaps and exclude obstructions. The wall footprint, packing sheet and supplied vinyl area are different. A lifestyle photo may show more than one kit and is not a coverage guarantee.

A common question

Does removable mean every painted wall stays unchanged?

No. Paint condition, coating, cure and texture affect adhesion and removal. Follow the paint and material guidance and test an inconspicuous area first.

Before you continue

Keep the exact artwork version, finished measurements, selected construction and intended use together. If the product or surface is uncertain, resolve that question before approval. Ask our team about your project.

Compare the current materials · Compare compatible finishes

Search walls, wraps & projects articles and guides

The library includes eligible published articles. If it is unavailable, use the complete Sticker Tips archive and Ideas archive.

Take the checklist with you

Printable measuring sheet with calibration (PDF). Version 1.0, October 8, 2026. The download supplements this guide; check the current product instructions before use.

Print at 100% / Actual Size with Fit to Page turned off. Confirm the one-inch square and 50 mm line with a physical ruler before measuring.

Window planning: attachment and viewing side

Two planning cross-sections show a graphic positioned outside glass and inside glass. The observer is outside in both. The exact adhesive and print construction must be confirmed; mirroring alone does not change it.
Window planning diagram only, not a promise that both constructions are offered. Tell us the attachment side and reading direction, then confirm a supported product. Mirroring text alone does not establish reverse-print or front-adhesive construction.

Read the diagram

  • In both examples the observer reads the graphic from outside the window.
  • Outside attachment: the graphic is on the outside face of the glass.
  • Inside attachment: the graphic is on the inside face of the glass, so the outside observer looks through the glass.
  • Specify both attachment side and reading direction. Confirm a supported construction before ordering; mirroring artwork cannot change the adhesive side or print-layer order.